Dinamic PRO M5 Series Briquette Press
New-generation, Made-in-Italy hydraulic briquetting machine for large companies. It compresses wood chips and sawdust, paper, biomass, plastic, and other industrial materials into 70 mm diameter briquettes at a pressure of 800 kg/cm², reducing the volume of the chips by up to 90%. With an approximate output of up to 270 kg/h, it is the most advanced machine in the completely redesigned Dinamic Series and is the solution for industries that require high productivity and advanced process control.
Dinamic PRO M5: Every component is new. Every system has been redesigned from scratch.
A generation beyond the standard Dinamic Series
The Dinamic PRO M5 Briquetting Press is a completely redesigned machine—more reliable, more efficient, and more technologically advanced—in which every system—from the base to the new continuous-feed material feeding system to the hydraulic system with DIN-compliant components integrated into a single unit, from the oil cooling system with continuous off-line filtration to the new hydraulic clamp with bolted head, right down to the new electrical control panel with a Siemens HMI—has been revised with the goal of taking build quality, operational reliability, and process control to a higher level. It is the result of 50 years of experience in industrial briquetting machines applied to a next-generation design.
Structure and Base: Structural Rigidity and Accessibility
The new base has been completely redesigned to allow the oil sump to be mounted at the rear, simplifying cleaning operations for both the tank and the hydraulic system. The new backlit rear compartment features a Plexiglas panel that allows you to view the status of the hydraulic system in real time, without opening any doors or stopping the machine.
The new RAL 7016 paint finish for the base and vise is a hallmark of a new generation.
Feeding System and Integrated Hopper: Uncompromising Efficiency
The new continuous-action material feeding system, driven by a dedicated gearmotor, ensures superior mixing of the material prior to compaction. The new integrated Ø 1200 mm hopper is constructed without joints, eliminating points where material can accumulate or leak. It is designed to accommodate level sensors and an inspection hatch, ensuring simple and safe operation and avoiding the need for future modifications.
Hydraulic system: a single unit for optimized fluid dynamics
The new hydraulic system has been completely redesigned and streamlined. All components are DIN-compliant, offering higher performance and greater durability, and are grouped into a single control unit, eliminating connections between separate components and ensuring harmonized and stable fluid dynamics. The new circuit separation of the actuators allows for independent control of each hydraulic movement, increasing precision and reducing interference between cycles. The cast-iron hydraulic pump is designed for high pressures and a long service life. The new control valves prevent pressure spikes and sudden starts of the hydraulic system, ensuring a smooth start-up of the compaction cylinders and bucket for improved movement control. The new suction filters ensure maximum oil cleanliness and protect components from contamination.
Oil cooling system with continuous off-line filtration: guaranteed continuous operation
The new oil cooling system consists of an air/oil heat exchanger, a filter, and a self-contained motor-pump unit. It is designed to ensure continuous oil purification by maintaining the oil at an optimal temperature, preventing overheating, reducing component wear, and consequently minimizing long-term maintenance and machine downtime.
Redesigned Hydraulic Clamp: Innovation and Advanced Technology
The new vise has been completely redesigned with a bolted upper jaw: a design that ensures far greater structural rigidity and durability than previous versions. The new piston anti-drop system simplifies maintenance.
Electrical control panel with the latest-generation Siemens PLC and HMI: operation under control at all times
The new electrical control panel with a multilingual Siemens HMI is one of the most innovative components of the Dinamic PRO M5. The new HMI panel, featuring updated graphics, provides the operator with a complete overview of the machine’s status, allowing them to monitor all parameters in real time—including the various pressures within the hydraulic system—as well as maintenance schedules, access to general information regarding electrical and hydraulic diagrams, spare parts lists, and much more.
COMAFER Industrial Connected Services: Support When You Need It
Industry 4.0 readiness, remote assistance, and remote monitoring via the Secomea Site Manager 1529 module, included as standard equipment for online connection via the company’s fixed network. With this system, operations can be monitored directly from headquarters via the control panel. Discover COMAFER's Industrial Connected Services system
Key Standard Features
Oil sump mounted on the base. Dedicated gearmotor for the material feeding system. Integrated hopper. DIN-compliant hydraulic components with circuit-level separation of the load cells. Cast iron pump. New oil cooling system with continuous off-line filtration. PLC with remote support module and HMI.
Compatible materials
Wood (all types), paper, cardboard, biomass, plastic, MDF, leather, and many other materials with moisture content between 8% and 17%. For non-standard materials, a free sample test is available at COMAFER’s R&D department.
Measurable operational benefits
Briquetting with the Dinamic Pro M5 reduces waste volume by up to 90%, cuts recycling costs by 70%, and reduces handling and transportation costs by 80%. Briquettes made from natural materials offer a heat output of 4,000–4,500 kcal/kg, which is 80% higher than that of conventional firewood. Continuous offline oil filtration reduces maintenance costs over the long term.
Hyper-Depreciation 2026
This briquette machine is eligible for the 2026 hyper-depreciation program:
Eligible asset pursuant to Article 1, paragraphs 427–436, of Law No. 199 of December 30, 2025 (2026 Budget Law).
From hopper to briquette
How Metalpress series briquetting machines transform waste chips into resources in 4 stages.
01
Feeding
A hopper with motorized agitator ensures continuous feeding of metal chips
02
Dosing
A drawer operated by a hydraulic cylinder meters the material into the compaction chamber
03
Compaction
A compaction cylinder compresses the chips at pressures up to 3764 kg/cm2, separating the coolant during pressing
04
Ejection
A gate with specific anti-wear treatments, equipped with a hydraulic cylinder, ejects the finished briquette
Technical Features
New base
Designed and manufactured using high-quality, heavy-gauge sheet metal and tubular sections for excellent resistance to stress, in accordance with COMAFER technical specifications. It serves as both the main load-bearing structure and the oil reservoir.
Gearmotor
Highly reliable and designed for continuous operation. Its function is to continuously drive the agitator of the material feeding system.
New Hydraulic System
Designed and manufactured with high-quality components that comply with COMAFER technical specifications. Its function is to manage the machine's operating cycle.
Intake Filters
New Oil Cooling System
Briquette ejection system with a new clamp
Cast iron hydraulic pump
To ensure high pressures, intense cycles, and a long service life. Its function is to generate oil flow in the hydraulic circuit and pressure in the system
Electrical panel with PLC and remote support module
Designed and manufactured with high-quality components that comply with COMAFER’s technical specifications. It provides general management and control of the machine and, through the module, enables remote connection to the briquetting machine to perform diagnostics and provide updates via the COMAFER Industrial Connected Services system.
New Electrical Panel with PLC
Siemens HMI
For displaying operating parameters.
Technical data
| Indicative hourly production | 70–270 kg/h |
|---|---|
| Brick Size (Ø) | 70 mm |
| Pump Motor Power | 9.2 kW |
| Total Installed Capacity | 12 kW |
| Voltage | 400 V / 50 Hz |
| Hopper (Ø) | 1200 mm |
| Machine Dimensions (L × W × H) | 1320 × 2304 × 1534 mm |
| Weight | 1,800 kg |
| Painting the base, platform, and vise | RAL 7016 |
| Painting of the housing, hopper, and electrical panel | RAL 7035 |
Free testing of your material
Not sure if this is the right machine? Send us a sample. Our R&D department will test your material and provide you with briquetting data.
Accessories
Low-level sensor
To be installed on the hopper. It automatically starts and stops the machine depending on whether material is present, thereby optimizing electricity consumption.
Maximum level probe
To be attached to the hopper. For automated control of material feeding into the briquette machine.
Inspection door
To be applied to the hopper. It consists of a robust painted steel frame equipped with a viewing window that facilitates maintenance operations and/or material removal. Recommended when the machine is placed under silos and filter stations.
Threading head
To be applied to the compactor cylinder punch to thread the briquettes and obtain greater length
Briquette breaking device
To be applied to the sleeve to obtain briquettes of adjustable length in four positions.
Anti-freeze system
To be installed on the oil tank. It consists of an electric heating element that can be adjusted via the HMI. It is required when the briquette machine is located in environments that are not adequately protected from the cold.
Supplementary Hopper
To be applied to the base hopper to increase chip storage volume. Ø 1200.
Hopper cover
To be applied to the hopper to prevent material spillage during feeding with automatic devices.
Ready to transform your waste chips into value?
Every day thousands of companies worldwide use a COMAFER machine to reduce costs, improve organization, and contribute to a more sustainable production process.
Start today: contact us for a free quote and you will be assisted by one of our professionals.